“If you need a machine and don't buy it, then you will ultimately find that you have paid for it and don't have it.”  Henry Ford

Get a Quote
Tin Knocker sheet metal working machinery at KJ Machinery Sales

Tin Knocker

TIN KNOCKER’S sheet metal fabrication machines are designed with small- to mid-sized contractors in mind. We strive to provide high-quality machinery at prices that all shops can afford.

Tin Knocker Duct Beader at KJ Machinery Sales

Tin Knocker 1660 Duct Beader

$8,800.00

STOP CROSS BREAKING. SAVE TIME AND MONEY… with this 60″ x 16 Ga. adjustable beader. Produce SMACNA approved beads in a fraction of the time it takes to cross brake. A one man operation, this heavy duty beader comes with five (5) sets of bead tooling that can be located anywhere over the 60″ working length.

Tin Knocker Power Cleat Bender at KJ Machinery Sales

Tin Knocker No. 30 Power Cleat Bender

$6,950.00

The TK No. 30 Power Cleat Bender is a smooth running, quiet machine that will last a career. Fast and efficient, this machine effortlessly prepares the duct for drive cleats. The machine is strong enough to form the reverse, open hem with a swift wiping action. THIS MEANS LITTLE OR NO SHOCK AND THE MACHINE WILL NOT KILL ITSELF. The TK No. 30 is the only machine in the market with a proven FAILSAFE SYSTEM which protects the machine from damage due to operator error.

Tin Knocker Universal Brake at KJ Machinery Sales

Tin Knocker 1016 Universal Brake

$7,950.00

An incredibly universal hand brake. Featuring box & pan fingers up top and segmented, relocatable bend apron tooling below. Perfect for complex parts to include flange down bends, transverse duct forming & much more. With strategically positioned counter weights this brake makes for easy and smooth manual bending.

Tin Knocker Combination Machine at KJ Machinery Sales

TK 724 Combination Machine (w/5 Pair of Rolls)  $1,185.00

A multi-purpose deep throat machine, capable of forming many shapes on the sheet metal edge. Comes standard with roll tooling for: Turning, Burring, Wiring, Crimping and Ogee Bead.

Tin Knocker TK Power Crimper Beader at KJ Machinery Sales

Tin Knocker Power Crimper Beader

$4,950.00

This is a versatile, workhorse of a machine. With a 13” throat and capacity of 18- gauge mild steel, it can perform most all beading and swaging functions. It is a beefy 3⁄4 HP machine, with the business end made of solid, machined cast iron, mounted on a sturdy sheet metal cabinet. A two-pedal foot switch allow the operator to have two hands free at all times when changing direction of the rolls. An enlarged back gauge plate also facilitates handling of the part.

Tin Knocker TK No. 16 Power Flanger at KJ Machinery Sales

Tin Knocker TK No. 16 Power Flanger

$3,950.00

Tin Knocker TK Hydraulic Corner Notcher at KJ Machinery Sales

Tin Knocker TK Hydraulic Corner Notcher

$3,850.00

Tin Knocker TK Edge Notcher at KJ Machinery Sales

Tin Knocker TK Edge Notcher

$2,350.00

The TK Edge Notcher can now be ordered with either: Slot Notch or “V” Notch! Includes both sets of tooling 1 machine to 2 notches.

Tin Knocker TK Hem & Kick Roll Former at KJ Machinery Sales

Tin Knocker TK Hem & Kick Roll Former

$16,500.00

This machine is standard equipped with no tooling in the center position and (2) sets of outboard shafts equipped with:

Tin Knocker TK 16 Ga. Pitts. at KJ Machinery Sales

TK 16 Ga. Pitts. (Choice of Opposing Rolls)

$7,950.00

IT COMES LOADED!!! The 16 gauge Pittsburgh Lock machine has 7 forming stations with 2 forming positions. One position forms the Pittsburgh Lock, while the outboard position has the ability of forming a number of other profiles, to include: Acme, Drive Cleat or 4 in 1 rolls (3/16” Right Angle Flange, 7/16” Right Angle Flange, Standing Seam and T-Connection. Your choice of rolls opposite the Pittsburgh rolls.

Tin Knocker TK No. 24 Collar Maker at KJ Machinery Sales

TK No. 24 Collar Maker

$5,650.00

Notch,bead,crimp and roll complete round starting collars, 3″ to 14″ in diameter out of 24 to 30 gauge galvanized – in seconds, not minutes and with only one pass! Just cut to width and length or use scrap. This machine uses either 3″ or 6″ width blanks with simple movement of the crimp roll.

Tin Knocker TK 20 Ga. Pitts. at KJ Machinery Sales

TK 20 Ga. Pitts. (With Choice of Drive Cleat or Acme Rolls)

$4,950.00

A workhorse! The heart of any HVAC sheet metal shop. This 5 station 20 Gauge Pittsburgh lock roll former is offered with choice of Drive Cleat or Acme Rolls on the other outboard side. Powered by a 1 HP motor with V-belt drive, this machine is built for dependability.

Tin Knocker TK 20 Ga. Button Lock at KJ Machinery Sales

Tin Knocker TK 20 Ga. Button Lock (230/3 Phase) (3 HP)

$8,950.00

(Also known as “Button Punch Snap Lock”
Tin Knocker’s 9 Station Button Lock Roll Former means no hammering over of edges and fast duct assembly. 220/3/60 Electrics, standard.
Comes with “male” tooling on one side and “female” on the opposing side. A fast, effective way of marrying 20 to 26 gauge duct sections.

Tin Knocker TK S & Drive Plus Cleat Former at KJ Machinery Sales

Tin Knocker TK S Drive Plus Cleat Former (5HP,230/3/60)

$9,950.00

This machine pays for itself in scrap and labor savings! A versatile machine of multi-functions. It slits the blanks to width and feeds either of the two roll sets. The machine comes standard with your choice of two sets of tooling. Most common examples: 20 Ga. Pittsburgh and 4-in-1 Rolls and Male & Female 20 Ga. Button Lock. It is fast, too. Many other roll sets to choose from… two sets included. The slitting feature allows you to quickly and easily turn scrap metal into usable product. FAST, FAST PAYBACK.

Tin Knocker TK Fourplex S & Drive w/Slitter Attach at KJ Machinery Sales

Tin Knocker TK Fourplex S & Drive w/Slitter Attach

$16,650.00

With Automatic Blank Slitting
ANOTHER MACHINE THAT PAYS FOR ITSELF IN SAVINGS! Imagine being able to pick up scrap behind your shear and within seconds, turn that scrap into usable product. This machine comes with two slitter rolls and four roll sets, two of which are your included choice. Outboard rolls can be selected from a list of available profiles (Pitts, Button Lock, Right Angle Flange, 4-in-1).  Value from scrap and labor savings, multi-functional service, speed and flexibility. Comes with S & Drive Cleat down the center and choice of rolls for the outboard shafts. Common configurations are: Male & Female 20 Ga. Button Lock or 20 Ga. Pittsburgh and 4-in-1 Rolls on the opposing side. NO OTHER STANDARD ROLL FORMER HAS FASTER PAYBACK.

Tin Knocker TK T-D-P Roll Former at KJ Machinery Sales

TK T-D-P Roll Former (w/TDP & Clip Rolls)

$28,950.00

Produces either TDC or TDF flanges.
At last, an affordable, full service, high quality transverse duct connector machine!!! HERE’S THE BEEF! This 14 station roll former comes standard with TDC or TDF Rolls, Slitter and Clip Rolls outboard. This T-D-P roll former will roll sheet metal into leak proof, sealable TDC or TDF flanges at speeds of up to 50 fpm, automatically! Start saving time and money by forming your own TDC or TDF flanges – with their snap on corners – and eliminate spot welding altogether. Buyer must specify which set of transverse duct connector rolls are wanted on the machine (TDC or TDF). Slitting and Clip Rolls come on all TDP roll formers.

Tin Knocker TK 1524 Spot Welder, at KJ Machinery Sales

TK 1524 Spot Welder, Foot Operated (Water Cooled)

$5,650.00

At last, a Heavy Duty, Industrial Quality Spot Welder, at a Price that you can afford!
Features:
Foot Operated
Water cooled (prep)
Swivel Arms
Swivel Foot Pedal
Universal Reversible Double End Arms, 90° & 22°
Vertically Adjustable Lower Arms
6 Point Heat Selector
1″ Quick Release Tip Holders w/ No. 2 Morse Tape Sockets
(2) No. 2 Conical, 5/8″ Dia. Alloy Tips

Realty Productions Co